January 19, 2023
Description
It is a decoration designed to decorate a cake. It's very simple. It is 14 cm high, 20 cm wide and 0,4 cm thick. Please refer to the printing instructions before printing. The model can be proportionally scaled up or down, but you need to add or subtract the height of the layers!
Printing instructions
The print orientation should be placed on the mat with the flat side facing out. It is designed to be printed without backing. Print with a layer height of 0.2 and a nozzle of 0.4 and with 100% fill and 2 perimeters.
Translated with www.DeepL.com/Translator (free version)
License:
Creative Commons — Attribution — Noncommercial
8
evax design
