HSW bling, aka vase mode insert

Honeycomb storage wall bling, is that even a thing?! It is now! Coming in at only 1.7g of filament and 8min print time and promising a satisfying yet easy print, this vase mode honeycomb wall insert is painless to print and really fun to play with!

There two really important print configurations to get this working:

1. Print in vase mode
2. Set number of bottom layers to a number that results in a 2.4mm bottom shell (i.e. 12 layers for 0.2mm layer height) 

I printed these with PLA+ (Fusion Filaments HTPLA+, to be exact) with a 0.4mm nozzle (0.45mm extrusion width - default for PrusaSlicer) and 0.2mm layer height. The resulting inserts have a nice snap feel, minimal wiggle, are easy to pop out, and have withstood multiple reconfigurations.

Works great with PLA also!

Please post your experience with other filaments and configurations!