Pi TFT 43 Display Mount

I designed this for my mini bear but the BIQU PiTFT43 ended up not being compatible with my CB1. Should work for any Raspberry Pi based instance of Klipper. 

Print Flat with no supports. Works fine in PETG, ASA, and ABS. It will probably work in PLA if that's what you have. 

You will need: 

• 2 M5x12 bolts
• 2 M5 T-nuts of your choice
• Display Ribbon cable with a length suitable for your setup

 All other hardware is included in the PiTFT43 package.