January 21, 2023
Description
Overview:
Compact and cute spice rack. It's modular so you can print exactly as much as you need.
Instructions:
Where to get the tubes:
The ones in the photo are 25x100mm. I couldn't find same dimensions online (I bought mine in a local craft store) so if you can't get those I added models for 25x110mm which you can order here (or wherever else, that's just a random shop on Ali Express).
*If the link no longer works when you find this model, search for “Plastic test tube 25x100” (or 25x110)
Print and Assembly:
If you have 10cm tubes use models that end with 10 for 11cm tubes use those which end with 11. Models without a number work for both.
* 11 cm will work for both, I just personally like when it's more compact =).
All models can be printed without supports!
If you only want one row, than you need to print Bottom_Holders * as much as you need, Bottom_Double_Connectors one less than the amount of holders and also print labels.
If you wand to add the second row you need to print Left_Stand, Right_Stand, Upper_Holders * as much as you need, Upper_Connectors one less than the amount of holders and also labels. Additionally for each Stand if it's going to be on the side of the bottom row print Bottom_Double_Connector and if it's in the middle print Bottom_Triple_Connector instead.
*If the second level is too long and starts sagging, replace connector in the middle with Middle_Stand.
*If the tolerances are too tight, you might want to use a little persuasion (e.g. hammer) =)
*Comment if you want me to add some more labels.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Rushberg
