Logitech G433 Pivot Point Replacement Part for broken Headsets

My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(.

Here are my printable Spare Part's ;-)

You need:

• print all four Parts (two Left, two Right).
• 8 M3x8 Screws
• 8 M3 Nuts
• T5 Torx Screwdriver
• small Phillips screwdriver
• Allen key for the M3 screws
• a plastic Opening Picks (optional)
• soldering iron to desolder the cable on the two PCB's (easy !)

Have Fun ;-)

Print instructions

Print the outer parts (L and R) with a Support enforcer in the hole.
The inner parts doen't need Supports.

if've printed it with 0.15 Layer height and Galaxy Black Prusament PLA