7/16" R.E.P. Ratchet Drive Spindle

Liked the REP ratchet as is, but realized it'd be really cool as a direct drive for 1/4-20 hardware(which is a 7/16" head), which I use for Everything. 

So, 7/16" nut hole added from OpenSCAD BOSL2 library,  plus 0.10mm play. 

Scale the handle part from the original model up by 15%(115% total) in your slicer for this to work with it! 

Yes, walls are pretty thin between the ratchet notches and 2 of the hex corners… I wanted big enough to work but not be a behemouth to carry.  It should be fine. 

So, site software won't allow me to link the remix, because the original license prohibits remixes…. EXCEPT the one file in the set, is a blank hub purposefully marked as remixable! 

https://www.printables.com/model/88474-14-hex-bit-ratchet-wrench-tool-and-fidget-toy

Which is the one file I did use. 

I've played it safe and added a no-remix license to this file. If you wish to modify, please go get the file from the link above, and be sure to comply with that designs liscense and intent for the files and designs.