Stirplate for homebrewing and more - The Yeastmaster Stirplate

This is a stirplate case designed to take one of a number of common PC fan sizes, and whatever electronics you decide to use. All you need to provide is a case fan, some strong magnets, and the electronics to drive the fan (DC power supply or PWM controller, etc.).

Takes fan sizes: 40, 60, 80, or 120mm.

The blank front plate design included can be left blank, drilled for your electronics, or modified to provide custom mounts for your electronics.

The front plate can be secured to the case with 2 M4x8 screws.

Fans can be secured to the case with M4x8 screws or with the common, wide threaded pc fan screws.

There's a 12mm diameter hole in the rear intended for a wire gland. I used https://www.thingiverse.com/thing:2937955 for mine.

There are 7mm dia indentations in each corner that can take an adhesive rubber foot. I printed some from TPU.

There are also a number of zip tie mounts for cable management.

Print instructions

Use a brim as this is a large print and prone to curling.