Flsun v400 tool holder

i have seen a few tool holders for the Flsun v400, i saw 2 different models:

• https://www.printables.com/model/336836-flsun-v400-tool-caddy
• https://www.printables.com/model/313252-flsun-v400-toolholder

thanks for the ideas

i wanted to support ALL my handy tools that just lying around next to my printer
and i went for an “overkill” custom tailored one

• scraper
• all the tools that came with the printer
• a marker pen
• Stanley knife
• surface cleaning pad
• nozzle brush
• “misc. area” box

It's not a remix, it was built from scratch in Fusion 360. i built the tower mount from a paper sketch that i uploaded to the CAD app and refined with 2 different prints to see that it attached properly and very tight to prevent shaking.

i printed both with generic yellow PETG on my brand new Flsun v400

Base params :

• temp : 230 for first layer 240 for the rest
• speed : 150 mm/s
• retract : 2mm * retract speed 20mm
• NO SUPPORTS
• NO BRIM 

Tool Holder :

• infill : lines 20%
• walls : 3 (optional, but its stronger that way)
• top/bottom layers : 3 / 6 (PTEG tends to be problematic at these speeds so this will keep a top surface nice and neat)

Box :

• infill : lines 100% (its very thin)

if you liked it throw me a LIKE