Strix Nano Goblin fc deck and vertical vista mount

Vertical Vista Mount and FC sled for Strix Nano Goblin

This is a remix. I removed the mounting holes because it was impossible to get screws under there, and made it a bit more universal without holes. Just stick the pdb/fc to the base with some vhb. The mount istelf is held with the force of the carbon bar inside the body, just slide it back and bend the spires to the side a bit to get them under the bar.

Print the main mount and the esc trey out of pla or petg.

I also printed the spacers out of tpu and used them to pull the vista off the plastic a bit, I feel like the vista gets hot enough to soften the pla if its right against it, plus it pulled the base of the vista screws away from my other electronics. if you have some m2 gummies, those will probably work the same.

You can also mount your rx on one of the side spires.

I used epoxy to put the esc deck and the main unit together

Category: R/C Vehicles