Angled Spool Holder for Direct Drive

Optional Hardware:

 - 2 m4x6 screws

 - 2 m4 t-nuts

The optional hardware allows the spool holder to be secured in place. Without this, the spool will be able to slide on the top of the printer, but only if it is pushed. The screws just provide a little extra stability.

This model prints with no supports and attaches firmly onto 20x20 mm aluminum extrusions. You will need to pause the print in order to insert the m5 t-nuts used to secure the spool holder previously. This is at a height of 17mm.