Pi Pico case with room for headers and dupont connectors - blank or voron logo

Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS.

I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even color coded header pins.

All of the cases I found here on Printables however were just thick enough for the pico itself and flat soldered wires, so I designed my own case, thick enough for the headers and duponts connectors. I also added a strain relief block to secure the wires with a couple 2mm zip ties before they exit the case.

I did mine as part of a calibration set for my voron, following the Nero3d tutorial below, so I also did a matching box to stow the wire and accelerometer on its mounting bracket, so I put a voron logo on them, but I am also iuncluding a blank version of the lid.

 Here is the tutorial I have followed:

Here is the bracket I used for the Voron 2.4 Afterburner:

https://www.printables.com/model/334193-voron-afterburner-adxl345-mounts

And here is my other model with the kit box:

https://www.printables.com/model/376865-resonance-compensation-kit-box-blank-or-voron-logo