Angled Camera Mount for 3030 aluminum (designed for RatRig)

A 10 minute design to mount your camera to the side of your enclosure, but with an angle so it's still facing the middle.  It can be mounted upside down to switch the direction.  Angle is 30 degrees.  Included .f3d and .step so it can be modified.

NOTE:  Supports required for printing but they are super easy to remove

NOTE: I found out trying to mount upside down in my RatRig V-Core-3 that the printhead will crash into it when the print head goes to the front (for instance, for Z-tilt compensation).  So don't plan to use upside down without checking clearances.