January 27, 2023
Description
Use for passing 4mm OD PTFE tubing through a cabinet or a box. This is made for ½" walls, but should work for thickness on up to ¾". Use a ¾" bit to cut a hole, slip the retaining nut through the hole, then thread the Pass Through Bolt and tighten. 4mm OD tubing passes easily through it.
The PTFE End Bolt can be used to feed filament directly into the bolt and into the tubing on the other side. Install as above, force your tubing into the hole until it stops, and now you can funnel your filament through the outer bolt straight into your tubing.
1/25/23 V2 of end bolt uploaded, wrong model initially loaded.
1/12/12 Added end bolt with PC4-M10 fitting.
License:
Creative Commons — Attribution
7
FPV Smitty
