January 23, 2023
Description
Based on RyukyuD's idea of a modular tape organizer I built this one. It is not that versatile, but consist of less parts. Consists of less parts.
Nine different tape widths: 10, 12, 15, 20, 25, 30, 35, 40, 50mm. If you need other size, you may scale it in your slicer until a certain amount.
Use the angle pieces to mount under your workshelf or appropriate. Attach one angle, don't screw it too tight, as you want to turn it around the fixing screw to fill in different tape roll hangers. Cut an axle to your needs or scale the "Axle 150mm.stl" to your needs and print it. Fill spacers at your convenience. A 4 and a 8mm spacer is available, scale them to your needs.
Fix the second angle by another screw.
Designed from scratch with TinkerCad.
Printed on my Voron 2.4 (350) in PETG.
Note: Photographs of parts on buildplate show earlier stage of design. Now hangers are closed for stability and handling purposes. You do not change the arrangement of tape spools every day, do ya?
License:
Creative Commons — Attribution — Noncommercial — Share Alike
6
Tritschi
