Prusa Enclosure Bottom Table Leg Braces

I wanted to stack my IKEA Lack tables 3 high, and I'm not comfortable with the idea of my printer being perched on the highest level with nothing actually holding its' platform in place. I made up these brackets that are designed to print without supports using 2 perimeters and 10% infill with a 0.6mm nozzle extruding 0.63mm width and 0.4/0.3 layers. They are intended to screw into the base and top of the legs of the middle table on top of which the printer sits, for a total of 13 brackets attached to the middle table. I also will add 8 more brackets around the top of the legs on the bottom table, with the overall goal being to reduce/eliminate vibration and enhance structural rigidity of the whole assembly. The braces are slotted in the corners to allow cables to pass through.

These brackets, like all of my enclosure mod parts, utilize #6 x 3/4" deep-thread wood screws. I purchase them in bulk from the following amazon listing:

https://www.amazon.com/gp/product/B0002ZPEWC/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.3mm

Infill:

Notes:

0.6mm nozzle, 0.63mm extrusion width, any filament you want

Category: 3D Printer Accessories