Details can be found as well on : https://laderampe.net/ITatHome/WLED
No Supports.
Printed on Voron V2 (min. 280mm bed required)
with esun ABS+ fire red, 0.2mm
Warning / Safety Notice
No liability or warranty of any kind is assumed.
Hazard statements related to the used PCBs and Power:
- This product is intended for use by persons with relevant electrical knowledge and experience.
- This means that the person must be able to correctly dimension the light chain or light system to be set up (incl. e.g. selection of the power supply unit, light chain, cable selection, possibly necessary fuse elements) and to set it up using relevant electrotechnical standards. Incorrect or improper use can be dangerous.
- This product may only be operated with safety extra-low voltage (SELF) (protection class III).
- This product is not a toy! It must not get into the hands of children and must not be used as a toy.
- When connecting to the device terminals, observe the cables and cross-sections permitted for this purpose. Observe the technical data, in particular the maximum current carrying capacity of the power path. An overload can lead to the destruction of this product and/or to a fire and must be avoided by a specific design of the light chain or light system as well as by integrating the fuse elements, if necessary, both in normal operation and in the event of a fault.
- Install and connect this product only in a de-energized state! Pay attention to the correct polarity!
- We accept no liability for damage to property or personal injury caused by improper use or failure to observe the hazard warnings. In these cases, warranty claims are also void! We accept no liability for consequential damage.
- Protect this product from electrostatic discharge to avoid damage.
TravisWilder
