Statue of Nocturnal from Elder Scrolls Online

This is a model taken from the Elder Scrolls Online with some smoothing applied.

This model is available as one whole piece which is 170 mm high, or split into parts that assemble into a statue about 40 cm (15.8 inches) high. The statue has been designed with a hollow base to stash your trinkets in.

Printing with a brim is highly recommended. Both versions need supports to print and have very fragile points at the legs of the birds. The birds on the whole version will almost certainly come off with the supports and need to be re-attached. Handle with care!

Print instructions

Supports are necessary for all parts.
A 5 mm brim was used on most parts.
3 perimeters were used on the parts with the birds.