Wyze Cam V3 Outdoor Housing

Wanted to put some sort of camera outside hanging off of my roofs awning and the Wyze cam V3 seemed to be a good choice as the color night vision looked very crisp and the device itself is already weather resistant. Its also a bonus that each camera is only 35 bucks and can record for about a week with a $10 SD card. 

Looked for a file to make the camera a little more outdoor friendly and couldn't find much so decided to whip up my own. Designed for and printed out of ASA/ABS, made to be as easy as possible to print. May be [slightly] too large if printed out of a low temp material like PLA, but interior can easily be shimmed with paper/tape/etc.

BOM:

(4X) M3x5x4 Heatset Inserts 

(2X) M3x25 SHCS

(2X)M3x40 SHCS - or - (2X) M3x25 for a total of 4 if visor is not used

• Daytime and nighttime photo shown for reference from a 3rd story roof. 
• Screwing in the mount to the house can be tricky with the visor in the way, but is definitely possible, it just needs to be done at a bit of an angle