DJI Osmo Action 1 Lens Cap & Filter Removal Tool

This doubles as a lens cap for the Osmo Action 1 and also a Filter Removal Tool. The filters/lens protectors on the Action 1 are really hard to take off since they're on tight enough to preserve waterproofing. This is a lens cap with a large hex profile in order to help remove and install the filter.

It is slightly tapered at the bottom to allow for easier installation and removal, so press it on a bit to where it almost bottoms out onto the Action 1's body. I use it only to loosen the filter and then remove it by hand. If you remove it completely with this cap/tool the filter is hard to remove from the tool. If that happens, just thread it back onto the lens a few turns and remove the tool.