Medieval Torch

Here are the files for my Medieval Torch,

which can be printed without supports in appropriate colours (or un-appropriate colours if you like. lol)

It was designed to house a home made silk flame and battery, though would look awesome without this as part of your Halloween Decorations.

I hope you enjoy.

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee

Print instructions

For my silk flame I combined a 80mm 5v fan, Adafruit Gemma M0, Neopixel ring and a small power bank.... I followed Adafruit's tutorals to get the neopixels working, and used there Jack-o-lantern code for the fire effect. 👍

the upper and lower cages glue together,
the handle parts are glued together with the handle steel, using the keys to add strength.

The handle can then be screwed into the cage using the 3D printed threads

the Baffle is to hold the silk (100% pure works best and a shawl costs less than you think and would provide sink for MANY torches or hold the rest back for other projects.)
one the silk is glued the baffle then it was then pushed onto the screws in my fan, you may need to modify this depending on what your fan is like.