January 26, 2023
Description
These are 4 different servo plug cover pairs. Each pair is unique so that it makes it difficult to connect to the wrong servo extension wire. You don’t need to print them in different colors but that would help as well. The design is such that the plug cover cut-out can only fit one way because the cut out design is non-symmetric. You need to superglue it to the original servo plugs.
Smaller cover goes on Servo side plug
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Filament:
Prusa Pla
Notes:
Use 3Mf file if you can. Stl file needs to be mirrored to print second set.
License:
Creative Commons — Attribution — Noncommercial
9
miniellipse
