December 4, 2023
Description
A cute deer for you. Print size at 100% is 90mm/3.5 in. I've scaled down to 75% without any problems, you can probably go even smaller
Printed on Ender 3v2 in PLA
Supports: yes
Infill: recommend at least 10%
Other settings I used: layer height 0.2, buildplate adhesion: skirt/none
I'm new to modeling - any suggestions are appreciated
I prefer sharing with attribution but I'm not going to come after you - I just like attention. I'd love to see what you make!
License:
Creative Commons — Attribution
Whitney Richmond
