Cover for horn on Trek Allant+ 8S

Because i have got an electrical faillure on the bike last week due to mud stacking in the horn. The bike did not recognized the horn as a genuine component so it stopped the assist. Due to that i decided to make a cover for it.

I have printed it in PETG because it will see a lot of water. setting of 0.2mm layer height on quality with 3 perimeters so the part is almost full. I have also activated the supports maybe you can be a bit more limiting the supports.

It is mounted on the 2 screws at the back of the engine you can unmount them, place the cover and screw them back. They are torx 25 so don't try first like me with allen keys ;)

The holes in the model is to let the water drain and it isn't fully fited because i was willing to see inside to know when i have to clean it.

Happy printing.