February 14, 2023
Description
Warning
The bug on the up part of the door, is related to an issue in the original STL file (missing join for the support). This version fix the issue but has not ben yet printed, it seems to be good in the slicer.
Definition
None.
Printing
Is required the same printer size than 3D SETS has defined.
Use the same setting than 3D SETS Rear Left Door for the modified Rear Left Door part.
For the G,M and C letters the back face should be on the bed .
Infill 100% and layer 0.05mm for the the G,M and C letters.
Build
The build required extra screws to assemble the 3 letters and the modified Rear Left Door ; 3M2x6.
Feedback
It is welcome.
Remark
None.
Version
v20230127 1st upload.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
mbe075
