Flying V Polybar Frame

This is a custom made frame designed as part of the Polybar PC controller project. This is designed to be printed as 4 individual pieces that slot into eachother to be glued into a single piece.

If required, the pins that connect the top/bottom to the corners can be trimmed slightly to give a more flush finish.

This has been designed to be a changable frame, using a M5x35mm screw to fix it rigidly to the Polybar frame. You may need to use a washer or 2 to pack out the distance of the screw to give a tighter fit.

Find out more about the Polybar project at:

https://github.com/roadsidebomb/Polybar-Minibar-3D-Print-Files