Tamiya Neo Fighter DT-03 front suspension mount

Spare front suspension mount for the Tamiya DT-03 when no genuine spare part is available.

It's pretty similar to the genuine part and - depending on your filament choice - should work just as well or even better.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2 - 0.3

Infill:

Notes:

I used PETG for my print but other filaments should work just fine, too. For a more rigid part use a low (0.3) resolution. Infill is your choice. I used 80% and 6 perimeters (0.4 nozzle).

The "easy_bridging_FSM.stl" has closed countersunk holes for better bridging results. So you don't need supports. Just use a drill or sharp knife to clear the holes after printing.

Category: R/C Vehicles