Sliding Tray For IKEA ALEX Drawer Units

I made this tray for some of the tools I use regularly.

Option 1: If you have a printer that is capable of printing parts that are 320 mm wide you only have to print the Complete.stl

You will also need 4 Self-adhesive felt pads, about 3 mm thick

It needs to be printed with supports. Please bear in mind that I couldn't test print that thing so I'm not absolutely sure if it will work properly. A "Make" would be nice

Option 2: If you don't have suche a big printer, you can print all the other files and will need some additional parts:

1 piece of plywood 288 x 140 x 6 mm

4 Screws M3 x 10 mm

4 Nuts M3

4 Self-adhesive felt pads, about 3 mm thick

The bit holders fit 6,3 mm and 4 mm bits.

Slider.stl, Rail.01.stl and Rail.02.stl are needed to be printed 2 times

Category: Organization