PTFE Bowden Tube Cutter 3/4/5/6/8mm - Remix

PTFE Bowden Tube Cutter 3/4/5/6/8mm - Remix of the nice design made by "eytec" 

The changes I made:

-To make the cutter a bit more grippy I added a kind of knurling on the surface of the outer diameters.

-Removed the small "handles".

-Added a bevel for an M4 countersunk bolt and a recess for a self-locking nut.

-Added 0,8mm bevels on the undersides of the prints to reduce "elephant feet".

Additional parts needed:

-M4x20mm countersunk bolt

-M4 self-locking nut

-Wilkinson Sword Classic Razor Blade

I already have a PTFE cutter and made this remix mostly because I liked its cool design. But the cuts are not as straight as I hoped they would be. So if you need really square cuts for the hotend of your Printer, there might be better cutters available on Thingiverse.

Print Settings

Printer:

Geeetech A10

Rafts: 

No

Supports:

No

Resolution: 

0,2 mm

Infill:

20%

Filament:

n/a PLA 

Category: 3D Printing