• Models
  • Contests
  • Slicer
  • Login
  • Start Here
    thingiverse-iconprintables-iconcults3d-iconmakerworld-iconmyminifactory-icon

    3D GO

    3D ModelsContestsCollectionsSaved ModelsOn a mobile device?

3D GO

Privacy Policy
Band wire winding for (1552.81 - 1 681.75Mhz) helix antenna 3D Printer File Image 1
Band wire winding for (1552.81 - 1 681.75Mhz) helix antenna 3D Printer File Thumbnail 1

Band wire winding for (1552.81 - 1 681.75Mhz) helix antenna

Obor avatarObor

January 28, 2023

printables-icon
DescriptionCommentsTags

Description

The stem enables to wind antenna coil for 1616mhz. The polarization is circular and stem It contains both - left and right hand path(L,R). You can chose desired polarization base on your needs. If you transmit an signal using satellite dish with the left. cir. polarization, signal will be mirror to right on dish and transfer to orbit.

With 6 winds the Gain of antenna could be ~ 11DBi,
with 5~10.27DBi,
4~ 9.39DBi.

Minimum reflector diameter should be ~ 115mm.

The coil should be tuned best for:
1552.81-1681.75Mhz (@-1dB)

For winding I recommend to use classic electrical 2.5mm copper wire. If you plan to transmit, do not forget to add some compensation copper band on the end. Since coil resistance would be different from 50 ohm.

License:

Creative Commons — Attribution

Related Models

Thor Mjolnir Hammer Bic Pen preview image

Thor Mjolnir Hammer Bic Pen

effektz profile image

effektz

9,085

Diverse Schilder / various labels  for hobby & makers preview image

Diverse Schilder / various labels for hobby & makers

RPK profile image

RPK

2

Customizable EU License Plate Keychain preview image

Customizable EU License Plate Keychain

John_M profile image

John_M

32

Vorpal The Hexapod Walking Robot preview image

Vorpal The Hexapod Walking Robot

vorpal profile image

vorpal

4,982

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi preview image

MakerZ – Open Source 1/28 RC Drift Chassis by Fails & Makes | Açık Kaynak 1/28 RC Drift Şasisi

Fails&Makes profile image

Fails&Makes

Cacciavite Portachiavi - Scewdriver keychain preview image

Cacciavite Portachiavi - Scewdriver keychain

Butti Maker Studio profile image

Butti Maker Studio

23

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED preview image

Snap-Together Mini Minecraft Jack-O-Lantern with integrated LED

scottrlindsey profile image

scottrlindsey

4,448

Small Parts Storage Drawers - Organizer preview image

Small Parts Storage Drawers - Organizer

GT 3D Makers profile image

GT 3D Makers

29

8