Dell WD19DCS Dock mount for IKEA Jerker Desk

Mount your Dell WD19 laptop dock securely to the IKEA Jerker desk frame.

I based this on SirJoga's Thingiverse post (https://www.thingiverse.com/thing:4877019) though in the end I made it up from scratch with my own measurements as a base for learning some CAD.  Design is obviously mimicked very closely though.

Dock slides in the top of the mount.  Cutout on the lower mount so the power button is still accessible, as well as a cutout on the upper for the power cord.

Mount uses  ¼" x 2" Countersunk machine screws and related nuts.  I'm sure M6 screws like the desk is designed for would fit just fine since they are slightly smaller.

This was designed to mount on the right side of one of the pillars.  If you want to mount it to the left side, just mirror the print in your slicer.

I printed mine in PLA+, at 0.3mm layer height and a 0.6 nozzle.