Arduino Due case

This case was created specifically to accommodate Arduino Due with Ethernet Shield 2 and BSB-LPB-LAN adapter (https://1coderookie.github.io/BSB-LPB-LAN_EN/). It could be of course used for other projects requiring Arduino Due with Ethernet Shield 2. The enclosure is compact, but there should be no problem routing a few wires (for example to sensors). Above Ethernet Shield 2 there is around 17 mm free space. 

The top part is slid into the bottom part. Four hooks ensure that the top part stays in place regardless of the position of the case. In the bottom part there are two holes for optional M3 screws for mounting the case on a carrier.
 

Additional parts:

to secure Arduino Due board in bottom part of the case

• 2x M3x8 
• 2x M3 nut

optional:

screws for mounting the case on a carrier

• 2x M3x