January 30, 2023
Description
Remixed to fit the BIQU B1 SE PLUS with an "Ender 3" style hot end swapped onto the carriage. Eliminates the stock shroud and uses a larger (40mm) fan which provides better cooling and less heat creep. Will not work with stock hot end as half of the stock hot end parts mount to the shroud. Recommend using a silicone sock on the heater block. The part cooling duct is close enough that without insulating the heater block the print may sag over time and interfere with the print.
License:
Creative Commons — Public Domain
7
Johnny B
