PowerSlide Flying Model Rocket - INVERTED PURSUITS LAB

Please Fly under the supervision of a Certifying Rocketry Association such as TRA/NAR/CAR/UKRA

This rocket is well equiped to serve as a L1 certification rocket within these organizations

Powerslide is a 54mm rocket flying on 38mm Hobby rocket motors.

Reccomend printing in PETG or ASA

Reccomended Body Tube Length of 30in

Additionally Requires

• 54mm Phenolic/Fiberglass Body Tube
• 54mm Nose Cone (3D printed NC avaliable from IPL: https://inverted-pursuits-lab.square.site
• 38mm Phenolic Body Tube (Used as liner in motor tube)
• Rail Hardware such as RailButtons will also be required: https://rail-buttons.com/ocart3/

Fin Can assembly similar to SCREWBALL Rocket. Instructions Here: https://inverted-pursuits-lab.square.site/downloads

Open Rocket File included for simulation work. Please ensure simulations show your rocket is stable before attempting to fly

I am not liable for inappropriate or general misuse of these files!

Certifiying Rocketry Associations are as follows:

TRA - Tripoli Rocketry Association

NAR - National Association of Rocketry (USA)

CAR - Canadian Association of Rocketry (Canada)

UKRA - United Kingdon Rocketry Association (UK)