February 1, 2023
Description
Holes are for tapping M2.5 screws, if you need larger (M2.8 or M3), drill to size, or modify the model.
Step and Fusion 360 file is provided with user parameter to adjust screw holes (Design workspace > Modify > Change Parameters > screw_hole).
If by any chance the fit is loose on the heatsink, slightly bend the center fin from the two larger sides so it can grab to the layers from the print.
Use M2.5 x 14mm screws or larger to attach the fan to the mount.
License:
Creative Commons — Attribution
7
fbeltrao
