Terminal block (6 posts, M2 bolts and nuts req.)

I'm sick of buying terminal blocks for $2.5 each. It's time to make my own.

You will need:

6x M2 bolts (around 8mm)

6x M2 nuts (they will slide into the square cutouts and be used to tension the bolts against the wire)

The holes are 2mm in diameter but you can use smaller wire or drill them out to be bigger (to an extent).

Nothing is stopping you from remixing more or less holes, or just printing them as is and leaving them without hardware, or printing them and cutting them off because youre insane.