Clips for 30cm and 40cm Euroboxes

I remixed for the Eurobox versions I get from my local Bauhaus.

Please note that there are versions for 30 cm boxes, measured side length of grip side (short end of the box), and for 40 cm sized boxes.

Also note that each set consists of a left and a right clip, so that youu can slide with both hands at the corner of your box. 

The clips for the smaller box are larger ones, as the small boxes have a longer cutout.

The remix was simple: Both versions are stretched in Z-direction 125% to better fill the cutout.
On top of that the 30 cm version of the clips are stretched in sliding direction by 125%. 

As the clips are designed for printing w/o supports they are not 100% symmetric when clipped on the box. Hence I mirrored them to get a left and right clip. Clip them on with the flat part facing the box. This way, it's easier to get them out again if ever you have to.

Printed in PET-G, 0.3 mm resolution, no supports.

You can find all necessary parts for support of 30 cm or 40 cm Euroboxes in the remix assembly Eurobox Support (Grips, Clips, Sleeves).