Niterider Solas seatpost mount

This is a replacement seatpost mount for a niterider Solas USB taillight. My original mount broke, and I needed a replacement. The clamp is intended for larger seatposts (30.9mm) but will fit smaller posts with rubber shims.

Hardware needed:
M3 x 10mm Socket head cap screw
M3 lock nut (preferred) or M3 standard hex nut
M4 hex nut
Original seatpost clamp knob or M4 x 24 SHCS

I included Solidworks 2017 files for your remixing fun.

Print instructions

Unassociated tags: bicycle seatpost, bike tailight, seat post, seatpost clamp, tail light

Category: Sport & Outdoors Summary

This is a replacement seatpost mount for a niterider Solas USB taillight. My original mount broke, and I needed a replacement. The clamp is intended for larger seatposts (30.9mm) but will fit smaller posts with rubber shims.

Hardware needed:
M3 x 10mm Socket head cap screw
M3 lock nut (preferred) or M3 standard hex nut
M4 hex nut
Original seatpost clamp knob or M4 x 24 SHCS

I included Solidworks 2017 files for your remixing fun.

Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 30%

Filament: Prusa PETG Black
Notes:

I used PETG for toughness, nylon would probably work even better.

All parts print OK without support if you orient them correctly.