Revo Hemera XS Tool - E3D Toolchanger

MODEL DETAILS

These are the printable parts for the Revo Hemera XS Tool for E3D's Toolchanger platform.

A mirrored version is provided but be aware, you will lose some build volume in the Y direction (around 10mm) if you choose to use this configuration.

If upgrading from original V6 Hemera tools, please note:

• Z offsets have changed by around 11mm from the original V6 Hemera tool so be sure to account for this in your config.g to avoid crashing into the print bed.
• The X position of the Toolplate has moved by around 12.5mm to the right. You will need to account for this in your tfree.g and tpre.g files.
  Note: the offset for the mirrored version will be different.
• The Y position of the Toolplate remains the same. 
   

RECOMMENDED PRINT SETTINGS

No supports are needed for any of these parts but bear in mind that the holes may need reaming/tapping.
 

Check out E3D!