Juwel Trigon 190 Guide for Inlet Outlet Pipes

The guide helps that the inlet and outlet pipes of the external filter stay in place and have the correct height on my Juwel Trigon 190 aquarium. The guide is design for pipes with a diameter of 18,4 mm and an arc that is approximately 100 mm.

The guide consists of three parts. The base that sits directly on the aquarium and fits the cutout in the back corner. The upper part that holds the pipes and a small connector, which allows to adjust the position of the upper part. Depending on the used material, it can be required to scale the connector to fit in the cutouts of the other two parts.

The connector should be printed to have a tight fit, but nevertheless clueing the connector and the upper part together is recommended. This prevents that the connector gets lost or falls into aquarium.

All parts can be printed without support. I got good results with 0.2mm layer height and 20% infill.