Clamp Tablet holder for treadmill

Print Instructions:

• The large clamp part were printed at 40% infill 
  • clamps should be printed with the circular pattern facing the bed for best strength, causes thread to be a bit messy but will still work
• Tray and Tray Body  30%
• Bolts and Nut were 15% but I recommend higher on the clamp bolts
• All parts printed at 0.2 layer height
• Pictured parts were printed in PETG (galaxy black & prusa orange)

Build instructions:

• Tablet tray is in 2 parts
• use m3 threaded inserts on the body
• use m3 8mm bolts to attach the tray to the body
  • Pictures only show 2 bolts due to me not inserting the the insets correctly, the uploaded model has been adjusted to make that process easier
• Assemble rest as pictured, threads may be a bit tight but will wear in