COVID Cool Mask / Flask Mask

Update: My own gcode and 3mf uploaded for all Part in a single print.

This is a remix of https://www.thingiverse.com/thing:4225667. We support their license and apply the same on this design.

Quote:BEFORE DOWNLOADING >>> Please read the full license. This is a free model, and you can share it and adapt it. But you must give appropiate credit and may not use it for commercial purposes (absolutely no exceptions). Finally, if you remix/modify it, you must distribute your contributions under the same license as the original. If you find this model elsewhere and somehow breaks any of the stated license conditions you can send us a message so we can take appropriate measures.

Do you want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact details on our webpage.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom

3DOM where contacted to assist a community member with a remix of design 425667.
The aim was to create a mask that could hold cool liquids or gels to held reduce the hot zone inside the mask.

We are proud to have been able to meet the users requirements and prove that it met the criteria.
It was noted that it was hard to communicate with this mask. The extra thickness and liquid volume would add additional sound deadening when speaking.
He also noted that it formed an exceptional seal to the face, which made it imperative to have the correct balance of filter material to allow air out. WE have considered an exhale valve but have not modeled that.

Filter connector parts are direct copies from part 425667. They have published some compatible alternatives that you might like to check out as well.

Print instructions

Category: Other Summary

This is a remix of https://www.thingiverse.com/thing:4225667. We support their license and apply the same on this design.

Quote:BEFORE DOWNLOADING >>> Please read the full license. This is a free model, and you can share it and adapt it. But you must give appropiate credit and may not use it for commercial purposes (absolutely no exceptions). Finally, if you remix/modify it, you must distribute your contributions under the same license as the original. If you find this model elsewhere and somehow breaks any of the stated license conditions you can send us a message so we can take appropriate measures.

Do you want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact details on our webpage.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom

3DOM where contacted to assist a community member with a remix of design 425667.
The aim was to create a mask that could hold cool liquids or gels to held reduce the hot zone inside the mask.

We are proud to have been able to meet the users requirements and prove that it met the criteria.
It was noted that it was hard to communicate with this mask. The extra thickness and liquid volume would add additional sound deadening when speaking.
He also noted that it formed an exceptional seal to the face, which made it imperative to have the correct balance of filter material to allow air out. WE have considered an exhale valve but have not modeled that.

Filter connector parts are direct copies from part 425667. They have published some compatible alternatives that you might like to check out as well.

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: Yes

Resolution: 0.15

Infill: Yes

Filament: Prusament PLA
Notes:

Supports should be set to from build plate only to prevent creating internal supports.
I may also suggest supporting the strap attachments, but this is unnecessary. I recommend using a support control to ensure on the threaded nozzle is supported.

How I Designed This

I have created a Design process walk through, from mesh source to printing. See here - https://youtu.be/CA47eEPQuto