Robust RØDE NT-USB Microphone Mount

This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks.

Nonetheless, the original design is not usable for FDM due to the tight fit (opening and screw holes too small) and the fact that the spring had been replaced by an extruded ring preventing assembly. Therefore, I modified the model with a notch to house the factory spring and increased the hole diameters.

Print with 100% infill and/or sufficient perimeters. Supports for the radius on the holder are recommended to help with the overhang. Presliced models with optimized outer contours and 0.1mm layer size for optimal stability included for PETG and ASA.