Ikea Lack Enclosure Door Knob remix for 6x3mm round magnets with Locking Hinges

I really like the Locking Hinges & Knobs by @Uko so I remixed it with my Lack Enclosure Door Knob remix for 6x3mm. You will also need the bolts from @Uko.

Getting the bolts into the door knobs is a bit tricky, especially the first time. I used a 1 Euro Cent coin and needle nose pliers to get it done. After the first time, the bolts move very smoothly and you only need the pliers for the final tightening.

Also checkout the original models for more information. Most importantly, the instructions from @Uko:

Print instructions

Recommended layer height: 0.15mm (so the threads inter-operate well).

‼ When printing knobs you have to pause the print and insert the magnets before the cavities are sealed