Bambu Lab Spool Holder (HugoHuge Filler compatible, incl. Easy-Print-version of FillerGuide)

HugoHuge Filler spool holder mount for the Bambulab X1C (fits P1P too).

Does not work with the original HugoHuge filler guide, sice it is higher and would collide with the AMS plug. I attatched an easy-print-version of the original part that fits this mount.
 

I really love the  HugoHuge Filler spool holder concept and wanted to use it with my Bambu Lab X1C. Pintables user golekipro was faster than me, so I got my inspiration from his design and want to credit him for this here!

My design is quite different, but ultimately the one thing I improved is a dedicated path for the PTFE tube from the AMS unit, since in my opinion the bending angle with golekipro's design was a little bit harsh.

The thread in the version with filament guide is M6 for corresponding PTFE-Fittings, though I can make a version with M10 or other threads if needed. I just used the fitting I had, and since this is the manual filament feed path it is not as critical regarding jams.

 Also, the part holding the bearings and ultimately the filament is a remix too because the original HugoHuge design has very steep overhangs in the first layers resulting in ugly layers. My version only needs a very little amount of support for uncritical surfaces that you do not even see in the mounted position. Much better in my opinion.


[Update 04.02.2023] Added Version “Mount_with_Filament_Guide_M10” for M10 PTFE-Fittings 
[Update 06.02.2022] Upon user request, I added a remixed version of the roller part (red part in the photos), where I separated the pin on one side to be glued in, so that you can print the roller without supports.