F1 Wheel for G920 - combined wheel plate

There are 3 files for the wheel plate in the parent thing that if you print the main one face down, can all be combined into a single print, this is the combined file, set Z-height so that the bump on the bottom is below the bed, then set print height to 14.1mm when using 0.3mm layers for a clean top layer. I printed this at 25% infill.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.3

Infill:

Filament: 3D Fillies PETG Black

Category: Video Games