DBUYS - Regulated Pocket Pack Lead for ORQA FPV Goggles

After accidentally mixing up my pocket packs and plugging 4s into my Orqa goggles, blowing the sh1t out of them, and costing me about £300 in repairs..... I decided to make this.

Print the lid and top

Pop in the DC converter (the right way around!)

Solder on an XT60 connector directly to the input pads

Chop the XT60 off of a DJI FPV goggles power lead and solder to the output pads

Add zip-tie for strain relief

Adjust the regulator to output 8.4v

Close the lid with M2 screws

Regulator - https://coolcomponents.co.uk/products/adjustable-4-12v-step-up-step-down-voltage-regulator-s18v20alv

DJI Power Cable - https://store.dji.com/uk/product/dji-fpv-goggles-power-cable

Don't Blow Up Your Sh1t!

Category: R/C Vehicles