Arduino Arcade Bartop

Hi!

This is anArduino Game System in Bartop Format. It's compatible withArduboy (http://www.arduboy.com) and uses a modification of the recently uploadedMini Arcade controller (http://www.thingiverse.com/thing:2293054)

Components:

• OLED screen 2.42''
• Arduino Pro Micro Board
• Two white leds
• Speaker/buzzer
• Mini switch (On/off)
• M2x6 screws for mounting the board, the screen and the controller.

All case pieces fits well and don't need screwing or gluying.

Inside the case there's a lot of room for mounting the circuits. For the main board i used a 70x30 mms solderboard (there's mounting holes for 70x50) and a bit of double sided tape for some other components

I've feeded the circuit with a rechargeable 9V battery. As all arduinos you can feed by USB or any kind of battery.

Not my intention doing here a electronics tutorial so visit the Arduino forums and the Arduboy community for tons of info an lot of people pleased to help.

Recently i uploaded a Arduino Handheld based on same hardware but using a 1.3'' OLED screen. (http://www.thingiverse.com/thing:22833499)

For more information about Arduboy Hardware and Games please visit http://community.arduboy.com

And a little video showing the thing alive: https://www.youtube.com/watch?v=APSXYWg92vU

Hope you enjoy it!!

Have fun!!

Print Settings

Printer:

BQ Prusa i3 Hephestos

Rafts:

Supports:

No

Resolution:

Alternative marquee

marquee_arduboy.st (alternative to marquee.stl)

Category: Electronics