Arduino Handheld Game Console Case

Hi!

Sometimes i make weird things with Arduino boards.

A few weeks ago i make aArduboy (for more info visit http://www.arduboy.com) clone with some buttons, screen, speaker and a Pro-micro soldering into a 70x50 mms piece of board.

The circuit is feeded with 2 little 3V bateries or by USB.

For any question about electronics and how to connect all the thingsplease visit the Arduboy Community ( https://community.arduboy.com ). There's a lot of info and amazing people who develop games, software, hardware... and they are very pleased to help.

Once the Arduboy clone seems to work i designed this simple case.

There's two versions: One with a cross-hat for the direction buttons an other with 4 round buttons.

The back and top pieces are joined with two M2 screws (you can also use 2.5 screws)

The components i've used are:

• Arduino Pro Micro
• OLED 1.3''
• Speaker
• Potentiometer (control the volume of the speaker)
• Switch buttons (recicled from broken mouses) but available at very low price in ebay or any electronics shop.

The cost of all electronis it's between 10-15€. Most of them buyed from China on ebay.

Also the Screen uses the Driver SSH1106 not compatible with the original Arduboy library but in the community it's easy to found a variation of the original library for different micros and screens.

Easy to print, no supports, no special configurations, just print, assemble with 2 screws and enjoy.

Designed in 123DDesign, i've included the original file, i encourage you to remix the design or modify for your needs.

Have fun!

Print Settings

Printer:

BQ Prusa i3 Hephestos

Rafts:

Supports:

No

Resolution:

Infill:

Doesnt matter

Category: Video Games