Arturia Minifuse 1 desk mount

A variation of my desk mount modified to fit Arturia Minifuse 1. 

The desk mounting is the same (eight M2(or slightly bigger) countersunk wood screws), and the snap mechanism is also the same. (two latches either side, just push the latches apart slightly, insert the interface, and it should just snap in.)

The only thing that's changed is the interface dimensions it can accept. The mounting holes are compatible with the Behringer mount.

As with the Behringer mount it can probably be used for other minifuse models as well, since they are the same dimensions, only wider. (not tested, since I don't own all models obviously, just going off the dimensions in the datasheets)

The provided STL has both halves in one file, so let me know if you need them in separate files, as I don't know if other slicers have the option of printing one STL at a time.

I've also provided the Fusion files for easy modification should you need it.

Or just message me and tell me how I could improve it. I'd greatly appreciate the advice.