Lumenier qav-pro micro whoop DJI O3 Air Unit

I designed this part to fit my DJI O3 Air Unit. As you can see on the pictures the big ass box fits right behind the cam. I used double sided sandwich tape in-between to stick it to the upper frame part and secured it with a zip tie.

I used TPU → Ninjaflex for this. But everything with a shore hardness of around 83A should work. Should probably be no problem if your material is harder or softer. You can adjust this with your infill settings.
I printed this with normal 15% infill at 0.15 mm Layerheight. 

If you have questions regarding a good setup for this quad hit me up.